SGDV SigmaLogic

SGDV SigmaLogic
The SGDV SigmaLogic is a SERVOPACK with included Add On Instructions (AOIs) for the Rockwell ControlLogix and CompactLogix PLCs, no other programming software is required.
SGDV SigmaLogic Features
The SigmaLogic allows Sigma 5 amplifier motion sequencing and axis control using Rockwell ControlLogix and CompactLogix PLCs via Add On Instructions (AOIs).
Highlights
- No other progamming software needed
 - Use direct command or 200 point configurable sequence table
 - Contains all the benefits of the Sigma-5 Servo System
 
Add-On Instructions
- Compatible with all CompactLogix and ControlLogix PLCs using RSLogix5000 software v17 and above
 - Familiar to AB users
 - Sample Program in RSLogix5000 available
 
Sequence Table
- Create individual move profiles and sequencing for the application with the free LogicWorks utility
 - Download/Upload sequence table and configuration data to or from LogicWorks
 - Embedded monitoring and test functions
 
SGDV SigmaLogic Specifications
| Item | Specification | 
|---|---|
| Software | SigmaSelect SigmaWin+ Ver.5 SigmaLogic Software Package  | 
| CPU | 200 MHz, 32 bit, ARM | 
| Memory | SDRAM, 32 MB SRAM, 512 kB with battery backup Flash, 4 MB flash. Code and parameter storage  | 
| Operator interface | LED: 10 LEDs (red and green – operating mode, communication and error status) User Configuration: 6x DIP switch (operating mode and communication configuration)  | 
| Environmental Conditions | Ambient Operating Temperature: 0°C to 55°C Ambient Storage Temperature: Ambient Operating Humidity: Ambient Storage Humidity: Pollution Level: 
 Operating Altitude:  | 
| Mechanical Operating Conditions | Vibration Resistance: 4.9 m/s2 Shock Resistance: Others:  | 
| Servo-Side Safety Functions | Input: /HWBB1, /HWBB2: Baseblock signal for power module Output: EDM1: Status monitor (fixed output) of built-in safety circuit  | 
| Network Capabilitiy | EtherNet/IP | 
| Diagnostic and configuration interface | Web interface | 
| Motion control performance | 1 controlled axis and one external position input at a trajectory update rate of 1 kHz | 
Single-phase 100 V
Single-phase 200 V
Three-phase 200 V
| SERVOPACK Model SGDV- | 
 180A 
 | 
 200A 
 | 
 330A 
 | 
 470A 
 | 
 550A 
 | 
 590A 
 | 
 780A 
 | 
|---|---|---|---|---|---|---|---|
| Applicable Servomotor Max. Capacity kW | 
 2.0 
 | 
 3.0 
 | 
 5.0 
 | 
 6 
 | 
 7.5 
 | 
 11 
 | 
 15 
 | 
| Continuous Output Current Arms | 
 18.5 
 | 
 19.6 
 | 
 32.9 
 | 
 46.9 
 | 
 54.7 
 | 
 58.6 
 | 
 78 
 | 
| Max. Output Current Arms | 
 42 
 | 
 56 
 | 
 84 
 | 
 110 
 | 
 130 
 | 
 140 
 | 
 170 
 | 
| Main Circuit | Three-phase 200 to 230 VAC+10% to −15% 50/60 Hz | ||||||
| Control Circuit | Single-phase 200 to 230 VAC+10% to −15% 50/60 Hz | ||||||
Three-phase 400 V
SERVOPACK Overload Characteristics

![]()  | 
![]()  | 
| Note: Overload characteristics shown above do not guarantee continuous duty of 100% or more output. Use a servomotor with effective torque within the continuous duty zone of Torque-Motor Speed Characteristics.  | 
|
                                    
	


 Flyer
